septic tank service near me

Leach field installation

Leach field installation

As you may have already guessed, a septic tank by itself won’t be very helpful. A comprehensive septic system with a leach field installation is what you require.

This is why: To distribute the wastewater back into the earth and stop your septic tank from overfilling, a properly operating leach field is essential.

A new leach field alone might cost anywhere from $3,250 to $15,300.

The price varies according to the technology you’re utilizing and the size of the field.

The least expensive option is a leach field for a traditional, gravity-based septic system.

pumps alarm price

Your septic system can optionally include a pump alarm. Its function is to notify you if the water level in your septic tank rises or falls or if the pump fails.

This will enable you to address the problem quickly before it results in more significant damage and call a plumber.

Find out if a pump alarm might be a good choice for your system by speaking with the person who installed your septic tank.

Your project would typically cost an additional $475 to install a pump alarm.

Septic Riser

Another optional, but incredibly useful, component of a septic system is a septic riser.

Although it adds an additional $300 to $600 to the cost of your tank installation, a septic riser will almost certainly end up saving you money over time.

Septic risers get their name from the fact that they raise the entry point to your septic tank to the surface, which makes regular maintenance simpler for professionals and less expensive for you.


Cost of a percolation test

You must have a percolation test performed by a licensed engineer prior to installing your septic system to determine the type of soil your installer will be working with and the depth of the layers in the ground (water table, bedrock, etc).

The type of system that will work best for your property will be determined by the results of the perc test.

The perc test could be performed for you by your septic tank installation, or you might need to engage a different expert.

In either case, budget $670 to $1,430 for the test.


Septic Tank Installation Costs Vary by Location

The terrain, climate, and soil type in your specific area will determine the type of septic system you should use, as well as the overall cost of the project. Consult a local expert to determine the best type of septic system for your area as well as the average cost.

Labor costs differ by location as well.

A homeowner in a metropolitan area will almost certainly pay significantly more for a new septic system than a homeowner in a rural area.

We calculated the national average labor cost, but the price you actually pay may be significantly lower or higher. To get a good idea of labor costs in your area, get at least three estimates from local professionals for your septic tank project — or any home improvement project.


A new septic tank or septic system will always cost at least a few thousand dollars, whether for new construction or existing property. Professional installation costs about $5,828 on average, with a typical range of $3,138 to $8,518.

The overall project cost is determined by the type of septic system used, the size of your home, and any additional services required to complete the installation.

Though the average price range is a good starting point, keep in mind that you could pay as little as $1,013 or as much as $18,163.

Most importantly, DO NOT attempt to install your own septic tank unless you are a professional plumber or a septic system specialist.

DIY isn’t worth the risk in this case, no matter how handy you are or how much money you think you’ll save.





Septic tank materials

Septic tank materials

You must decide on the septic tank material in addition to the system type.

Each choice has pros and cons as well as a different price range. We’ll go over each one so you can decide one is ideal for your requirements and financial situation.

In the US, the following materials are most frequently used for septic tanks:

Plastic: Plastic is typically the least expensive septic tank material because it is lighter and simpler to install than other septic tank materials.

Unlike concrete sewage tanks, plastic septic tanks rarely rust or crack (like steel).

Although they frequently crumble under intense pressure, they are generally fairly robust.

Concrete: In the US, concrete septic tanks are perhaps the most common choice.

Although they can endure for decades, they require routine professional inspections and maintenance to avoid significant cracking and other problems.

Because they are so massive, concrete tanks frequently require specialist equipment for installation, which raises the price.

Fiberglass: The most expensive choice would be a fiberglass septic tank. Similar to its less expensive plastic counterparts, fiberglass tanks are portable and simple to install. They are also resistant to concrete tanks’ typical cracking-causing expansion and contraction. Due of its nonporous surface, fiberglass won’t rot underground or support the growth of algae.

Steel: Septic tanks made of steel are no longer used. Steel will corrode or rust, which will cause your septic tank to collapse. In an existing system, a steel tank might be present, but chances are you won’t have the choice to have a new one installed (nor would you want to).

$665 – $1,900
$740 – $1,800
$1,400 – $2,000


No matter what material for your septic tank you choose, we can help you, call us today 



Septic Tank Costs

Septic Tank Costs: Everything You Need to Know

The Cost of Septic Tank Maintenance and Repair: What You Need to Know

Septic tanks are an essential component of many households, particularly those in rural areas where there is no access to centralized sewage systems. Despite its critical role in collecting and treating waste, many homeowners are often unaware of the costs associated with septic tank maintenance and repair.

In this article, we will explore the various costs associated with septic tanks, including the initial installation, regular maintenance, and potential repairs. Understanding these costs is important to ensure that you budget appropriately and can keep your septic system in good condition.

Initial Installation Costs

The initial cost of installing a septic tank system can vary widely depending on several factors, including the size of your household, the type of system you choose, and your location.

On average, homeowners can expect to pay between $3,000 and $10,000 for a standard septic tank installation.

It is important to remember that the initial cost of installation is just the starting point.

You will also need to factor in the cost of site preparation, which can include grading, excavation, and connecting the system to your home’s plumbing.

Regular Maintenance Costs

Regular maintenance is critical to ensuring the longevity and efficiency of your septic system.

This can include cleaning the tank, checking the condition of the drain field, and replacing any components that have worn out over time.

The cost of regular maintenance will depend on the size of your tank and the frequency of service, but it is generally recommended that homeowners budget between $200 and $400 per year for regular septic tank maintenance.

Repair Costs

While regular maintenance can help prevent many issues, there are still many factors that can cause problems with your septic system. These can include clogs, leaks, and damage to the drain field.

The cost of repairs will depend on the extent of the damage and the type of repair required, but it is not uncommon for repairs to cost several thousand dollars. In some cases, particularly if the damage is extensive, it may be necessary to replace the entire septic system, which can cost $10,000 or more.


Septic tanks play a critical role in collecting and treating household waste, but they also come with a cost. Understanding the costs associated with septic tank maintenance and repair is essential to ensuring that you budget appropriately and can keep your septic system in good condition. Regular maintenance, while costly, can help prevent more extensive repairs and replacements down the road.





in the following post we will try to answer the most common FAQ about septic tanks

  • What is a septic tank?

A septic tank is a large, underground tank that is used to hold and treat the waste produced by a property.

It is commonly used in areas that do not have access to a public sewage system.

  • How does a septic tank work?

A septic tank works by using bacteria to break down the waste that is produced by the property.

The waste enters the tank and is separated into three layers:

  • solids, which sink to the bottom;
  • scum, which floats to the top;
  • and effluent, which is a liquid that falls in between the other two layers.

The solids and scum are broken down by the bacteria, while the effluent is sent out to a drain field for further treatment.

  • How often should a septic tank be pumped?

It is generally recommended to pump a septic tank every 3-5 years, depending on the size of the tank and the amount of waste produced by the property.

However, this can vary, so it is important to consult with a septic tank professional to determine the appropriate schedule for your specific situation.

  • What are some signs that a septic tank needs to be repaired?

There are several signs that may indicate that a septic tank needs to be repaired, including foul odors, slow-draining plumbing fixtures, standing water in the drain field, and backups in the plumbing.

If you notice any of these issues, it is important to have the tank inspected as soon as possible to determine the cause and address any necessary repairs.

  • Can I do septic tank maintenance and repairs myself?

While it is possible to perform some basic maintenance tasks on a septic tank, such as adding bacteria or enzymes to help break down waste, it is generally recommended to leave repairs and more complex maintenance to professionals.

Septic tanks can be complex and can have serious consequences if not handled properly, so it is important to trust the work of a qualified and experienced professional.

While it is possible to perform some basic maintenance tasks on a septic tank yourself, it is generally recommended to leave repairs and more complex maintenance to professionals.

This is because septic tanks can be complex systems and can have serious consequences if not handled properly.

Basic maintenance tasks that you can do yourself include adding bacteria or enzymes to help break down waste in the tank and ensuring that only appropriate materials are flushed down the drain

(e.g., avoiding flushing non-biodegradable materials such as wipes, feminine hygiene products, and grease).


Contact Us today for a free quote


  • How does a septic tank work step by step?

A septic tank is a large, underground tank that is used to hold and treat the waste produced by a property.

It is designed to separate the waste into three layers: solids, which sink to the bottom; scum, which floats to the top; and effluent, which is a liquid that falls in between the other two layers.

This separation process is known as primary treatment.

The solids and scum are broken down by bacteria that are naturally present in the tank, a process known as digestion.

The partially treated effluent then flows out of the tank through an outlet pipe and into a drain field, where it undergoes secondary treatment as it filters through the soil.

The fully treated waste is then released back into the environment, where it is safely absorbed.

  • What is a 3-stage septic system?

A 3 stage septic system is a type of septic system that uses three separate treatment stages to process the waste produced by a property.

In the first stage, the waste is treated in a septic tank, as described above.

In the second stage, the effluent is treated in a secondary treatment system, such as a sand filter or a constructed wetland.

In the third stage, the effluent is treated in a tertiary treatment system, such as a chlorine contact chamber or a membrane bioreactor.

3-stage septic systems are typically used in areas with stricter wastewater treatment regulations or in situations where a high level of treatment is needed.

  • What are the five main parts of a septic system?

The five main parts of a septic system are:

  1. Septic tank: a large, underground tank that holds and treats the waste produced by the property
  2. Inlet pipe: a pipe that carries the waste from the property into the septic tank
  3. Outlet pipe: a pipe that carries the partially treated effluent from the septic tank to the drain field
  4. Drain field: a series of perforated pipes or trenches that are buried in the ground, where the effluent undergoes secondary treatment as it filters through the soil
  5. Soil: the soil serves as the final treatment stage, where the fully treated waste is absorbed
  • How long does it take for a septic tank to be pumped out?

The amount of time it takes to pump out a septic tank depends on the size of the tank and the amount of waste that needs to be removed. On average, it takes about 1-2 hours to pump out a septic tank.

However, this can vary depending on the specific circumstances.


  • Will the toilet flush if the septic tank is full?

If a septic tank is full, it will not be able to accept any more waste. This means that the toilet will not flush and the plumbing fixtures in the property may not function properly. It is important to have the septic tank pumped out before it reaches capacity to avoid these problems.



Why Do Tree Roots Want to Go Into Your Sewer Line?

Why Do Tree Roots Want to Go Into Your Sewer Line?

Clogged sewer lines are frequently caused by tree roots, resulting in sewage backups in your home.

These clogs are sneaky because they appear to appear out of nowhere.

That’s not completely true, though – often there are warning indications. Learn why this occurs so you can spot the issue and schedule sewage line repairs as soon as feasible.

Sewer Leaks Equal Tree Food

Humans don’t want to be near sewage, but trees do.

A sewer pipe transports organic debris and water, both of which are considered food by tree roots.

Human feces is incredibly nutritious for plants, which is why it was sometimes utilized as fertilizer.


Tree roots do not grow in your yard seeking sewer pipes at random.

Roots can find the line in two separate instances.

One possibility is that the pipe develops a leak, allowing sewage and water to seep into the soil. This is tasted by nearby tree roots.

The roots then grow toward the food supply and into the pipe’s break.


The roots fill the pipe and cause a clog as they become larger and more numerous.

Roots that have been growing into a pipe for a long period might fill it up and extend the pipe’s length.


Another scenario is when a pipe was recently installed and the dirt has not yet settled.

This looser soil makes it simpler for roots to move through, and if the new pipe has a fracture in it — even if it’s not sending sewage away from the pipe — tree roots can home in on it, penetrate the crack, and cause plumbing issues.


Regularly surveying your yard surrounding the sewer line is one of the best ways to prevent tree roots from clogging your lines.

You can find out where utility lines are in your yard by dialing 811, then following the sewer line and looking at the dirt.


Look for moist places when the rest of your yard is dry, and see if the grass or neighboring plants appear to be a little lusher than the rest of your yard.

If you notice any of these indicators, you should contact a plumber who specializes in sewer repair.


Examine the trees in your yard as well. Look up the sort of tree in the yard if you moved into a house with mature trees to discover if it is a sewage-unfriendly tree.

These are trees with aggressive, spreading roots that extend far beyond the trunk.

If you have any of these, call an arborist to have barriers installed to keep the roots out of the sewer line.


Keep trees with aggressive, spreading roots well away from the sewer line if you’re trying to plant them.

Look for trees with taproots, which are long, vertical roots that do not spread, if you wish to put trees near the line.

There are certain trees with non-aggressive spreading roots, but don’t take a chance with them.

Simple Answers

When a clog is severe enough, the line must be dug out, opened, and the roots and tree removed.

However, you may sometimes remove the roots without undertaking extensive yard work, and in many situations, you can maintain the tree as well.


However, in either instance, you should contact a plumbing or septic firm to have the tree inspected and see how it is hurting your sewage system.

If you don’t have the necessary experience, don’t try to do anything on your own.


Contact Turner Septic if you’ve had a sewage clog and suspect it’s due to a tree root mass.

Do not postpone!

To keep your home secure, you need to get that sewer line fixed as soon as possible.


call 888-428-0450